Call 208-376-3521
HBSI complete exterior home with gray siding, white trim, black roofing, windows, and stone chimney

HBSI material selections

Brands & Materials

Explore James Hardie siding, Owens Corning roofing, and Marvin, ProVia, and Simonton windows and doors—the products behind HBSI’s Treasure Valley exterior work.

The brands we install

Quality materials. Considered installation.

A lasting exterior starts with the right products and the details behind them. Explore the materials HBSI installs for Treasure Valley homes.

Fiber cement siding

James Hardie®

HB Siding installs James Hardie fiber cement siding—the siding we put on the majority of the homes we side.

Made from Portland cement, sand, water, and cellulose fiber, Hardie siding is fundamentally different from wood or vinyl. It resists moisture damage and holds little appeal for termites, woodpeckers, and other pests. The fiber cement siding is noncombustible; paints and coatings may still char or be damaged by flames.

James Hardie engineers its siding for different climate conditions. The HZ5® products HBSI installs in the Treasure Valley are designed for northern climates with freezing temperatures, seasonal temperature swings, snow, and ice.

The lineup covers the whole exterior: HardiePlank® lap siding, HardiePanel® vertical siding for board-and-batten designs, HardieShingle® siding, HardieTrim® boards, and HardieSoffit® panels. Factory-applied ColorPlus® Technology finishes are baked on and cured in controlled conditions for consistent color, adhesion, and durability.

Product highlights

  • Transferable 30-year, non-prorated limited substrate warranty on siding, trim boards, and soffit
  • 15-year prorated limited ColorPlus® finish warranty for specified peeling, cracking, and chipping claims
  • Made to withstand severe weather, including hail
  • HZ5® products engineered for northern-climate conditions

Substrate and ColorPlus® finish warranties are separate coverages. Manufacturer warranties are limited and subject to the applicable product, installation, maintenance, and full terms. HBSI reviews coverage before your project begins.

Roofing shingles

Owens Corning®

For roofing, HB Siding installs Owens Corning shingles, including the TruDefinition® Duration® architectural shingle line.

Duration shingles are built around patented SureNail® Technology: a reinforced, woven nailing strip with triple-layer protection in the nailing zone. The defined fastening area supports accurate installation and strong nail pull-through resistance.

The TruDefinition® color platform gives the roof depth and dimension. StreakGuard® Algae Resistance Protection helps inhibit algae growth that can cause dark roof streaks; availability varies by region.

Product highlights

  • Up to 130-MPH wind warranty protection for 15 years, subject to installation and warranty requirements
  • Limited lifetime manufacturing-defect warranty for the original purchaser of a qualifying owner-occupied, single-family detached home
  • SureNail® Technology for fastening strength
  • StreakGuard® algae resistance protection
  • Class A fire-resistance classification, subject to roof-system requirements

Manufacturer coverage is limited. Wind coverage applies after thermal sealing and proper installation. Lifetime, wind, algae, and non-prorated coverage have different terms, exclusions, and ownership requirements. HBSI reviews applicable coverage before your project begins.

Premium windows & doors

Marvin®

HB Siding installs Marvin windows and doors for homeowners who want thoughtful design, durable materials, and a broad range of options. Family-owned and founded in 1912 in Warroad, Minnesota, Marvin brings a long history of craftsmanship to new and replacement projects.

Marvin offers material choices for different priorities. Signature Ultimate offers natural wood interiors with extruded-aluminum-clad exterior options. Elevate combines warm wood interiors with Ultrex® fiberglass exteriors. Essential uses Ultrex fiberglass on both the interior and exterior for a streamlined, low-maintenance option. Other Signature lines use different material systems.

Ultrex is Marvin’s proprietary pultruded fiberglass. Marvin states that it is eight times stronger than vinyl and three times stronger than vinyl/wood composites. It expands and contracts at nearly the same rate as glass, a characteristic that helps resist leaks, seal failures, and stress cracks. Its acrylic finish is designed to resist fading, chalking, and peeling.

Product highlights

  • Wood, aluminum-clad, and Ultrex® fiberglass options to suit the project
  • Ultrex® fiberglass: Marvin’s stated 8× strength comparison with vinyl
  • Low thermal expansion helps reduce stress on seals and joints
  • 20-year standard insulating-glass seal-failure coverage on qualifying units up to 60 square feet
  • 10-year hardware and other non-glass component coverage, subject to warranty terms

Marvin’s qualifying limited warranty is fully transferable. Insulating-glass units over 60 square feet have a 10-year term. Coverage varies by product line, glass, finish, accessory, installation, and exposure conditions. Review the written warranty for your selected windows or doors.

Doors & windows

ProVia®

HB Siding installs ProVia entry doors, storm doors, patio doors, and windows.

For an entryway that balances character and durability, explore ProVia fiberglass and steel door options. Signet® fiberglass doors offer embossed woodgrain or smooth finishes with a broad range of panel, glass, and color choices. Legacy™ steel doors are built with 20-gauge steel for a substantial entry door.

For windows, Aeris™, Endure™, and Aspect™ offer different combinations of style, materials, and energy-focused glass options. ProVia’s ComforTech™ Warm Edge Glazing System uses insulating glass components such as Low-E coatings, gas fills, and a non-metallic warm-edge spacer. HBSI helps select the product, glass package, and options for your home.

Product highlights

  • Signet® fiberglass doors with woodgrain and smooth-finish options
  • Legacy™ 20-gauge steel doors: 49% more galvannealed steel than a standard 24-gauge door
  • Aeris™, Endure™, and Aspect™ window choices
  • ComforTech™ warm-edge glass with energy-focused glazing options
  • ENERGY STAR®-certified options for qualifying products, glass configurations, and climate zones

ProVia offers limited lifetime transferable coverage on specified units for qualifying residential owners. Glass, finish, frames, screens, hardware, and other components have separate terms. Transfer is generally limited to one subsequent homeowner and requires a timely transfer. Storm doors have a separate warranty.

Vinyl windows & patio doors

Simonton®

HB Siding installs Simonton vinyl windows and patio doors. Simonton crafts premium vinyl products in the USA, with design and glass options to help homeowners balance light, comfort, and style.

For a contemporary window look, the Simonton DaylightMax® Collection uses a slim-frame design to bring in more natural light and open views. DaylightMax windows combine premium vinyl construction with an insulating glass unit featuring ProSolar® Low-E glass, argon gas, and an Intercept® spacer system. Additional glass options are available for privacy, sound reduction, and other project needs.

Energy performance can be tailored to the home. Simonton offers region-specific glass packages, and selected configurations can meet ENERGY STAR® guidelines. Simonton-built windows and doors are manufactured and tested under the AAMA Gold Label Certification Program, which evaluates product performance and production consistency. This is a manufacturer product certification, not an HBSI installer credential.

Product highlights

  • DaylightMax® slim-frame windows for more glass, natural light, and open views
  • ProSolar® Low-E glass, argon gas, and insulating-glass options
  • ENERGY STAR® options selected for the applicable climate region
  • AAMA Gold Label certification for Simonton products and certified production lines
  • Residential lifetime limited coverage on qualifying DaylightMax components, subject to the series warranty

DaylightMax warranty coverage varies by component; screens have a one-year term. Labor and glass-breakage coverage have geographic and other limits and are not blanket lifetime benefits. A qualifying residential warranty may transfer once with the required notice within 30 days; screens and glass-breakage coverage do not transfer. Other series have their own terms.

Talk with HBSI

Choose the right materials for your exterior.